- Pairs with Anesi HP80 Gas Heat Pump for the Residential Forced Air Heat Pump System
- Replaces and operates like a traditional gas furnace, requiring only 1” hydronic connections inside the home
- Quiet operation with variable ECM blower
- Intelligent controls optimize energy efficiency
- Uses existing furnace circuit: 115VAC / 15A
- Flexible return air direction: sides or bottom
- Built-in hydronic components include: hydronic pump, 3-way valve, glycol expansion tank, and glycol reserve tank
- Remote system monitoring for homeowners and installation professionals
- Uses existing ductwork & AC coil
- Optional DHW with Indirect Storage Tank
Specifications
| Technical Data | Unit | Value |
|---|---|---|
| Coil Capacity* | BTU/h | 65,000 |
| Water Flow Rate | gpm/lpm | 8.5/32.2 |
| Max Supply Water Temp (@8 gpm) | ° F/C | 180/82 |
| Supply Water Temp | ° F/C | 125/52 |
| Blower Air Flow (min-max) | cfm/lpm | 500-1,400/14,158-39,644 |
| Hydronic Line Type | Pex (O2 barrier) or Copper | |
| Hydronic Pressure Drop (Nominal) | psi/kPa/FH | 5/34.5/11.5 |
| Glycol Reserve Volume | gal/L | 3/11.4 |
| Voltage | VAC | 115 |
| Maximum Power | Amp | 8 |
| Min Circuit Breaker Power | Amp | 15 |
| Length | in/cm | 33.5/85.1 |
| Width | in/cm | 23/59 |
| Height | in/cm | 41.6/105.7 |
| Weight | lbs/kg | 210/95.3 |
| Hydronic Connections FNPT – dia | in/cm | 1/2.5 |
| Return Air Connections – width x length | in/cm | 14/35.6 x 20/50.8 |
| Supply Duct Connection (vertical up – top only**) – width x length | in/cm | 16/40.6 x 18/45.7 |
| CTA2045 Compliance | Future release | |
| Communications Capabilities | MODBUS to GHP (which has cellular) | |
| Certification | ETL per UL 60335-2-40 & CAN/CSA-C22.2 No. 60335-2-40 |
**Downflow and horizontal flow supply air configurations will be available in future releases